Publicacions en què col·labora amb ANA ISABEL FERNÁNDEZ ABIA (21)

2024

  1. Analysis of gaseous emission and particle number size distributions in metal casting processes with binder jetting moulds

    Building and Environment, Vol. 252, pp. 111297

  2. Enhancing wear performance: A comparative study of traditional vs. additive manufacturing techniques for 17–4pH SS

    Wear, Vol. 540-541

2023

  1. Heat treatments of 17-4 PH SS processed by SLM to improve its strength and biocompatibility in biomedical applications

    Journal of Materials Research and Technology, Vol. 26, pp. 3524-3543

  2. Machinability of Selective Laser Melted 17-4 PH Stainless Steel in Turning Process

    Key Engineering Materials, Vol. 956, pp. 127-133

  3. Procesos de fabricación aditiva de piezas cerámicas

    Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 301-329

2022

  1. Microstructure–Hardness–Corrosion Performance of 17–4 Precipitation Hardening Stainless Steels Processed by Selective Laser Melting in Comparison with Commercial Alloy

    Metals and Materials International, Vol. 28, Núm. 11, pp. 2652-2667

2021

  1. Comparative study on microstructure and corrosion resistance of al-si alloy cast from sand mold and binder jetting mold

    Metals, Vol. 11, Núm. 9

  2. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012041

  3. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. Application of vacuum techniques in shell moulds produced by additive manufacturing

    Metals, Vol. 10, Núm. 8, pp. 1-20

  2. Feasibility of calcium sulfate moulds made by inkjet 3D printing for rapid casting of aluminium alloys

    Metals, Vol. 10, Núm. 6, pp. 1-17

  3. Heat treatments for improved quality binder jetted molds for casting aluminum alloys

    Additive Manufacturing, Vol. 36

  4. Towards functional parts by binder jetting calcium-sulphate with thermal treatment post-processing

    Materials, Vol. 13, Núm. 17

2019

  1. Analysis of microstructure and defects in 17-4 PH stainless steel sample manufactured by Selective Laser Melting

    Procedia Manufacturing

  2. Comparative study of aluminum alloy casting obtained by sand casting method and additive manufacturing technology

    Procedia Manufacturing

2018

  1. Caso de estudio en el procedimiento de un grupo de estudiantes cuando se aplica evaluación formativa en diferentes materias de un grado de Ingeniería

    XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

  2. Characterization of materials used in 3D-printing technology with different analysis techniques

    Annals of DAAAM and Proceedings of the International DAAAM Symposium

  3. Influence of laser energy in the surface quality of parts manufactured by selective laser melting

    Annals of DAAAM and Proceedings of the International DAAAM Symposium

  4. Modelo de evaluación y seguimiento de los trabajos fin de grado (TFG) y trabajos fin de máster (TFM) tutorizados en el área de Ingeniería de los Procesos de Fabricación

    XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

2017

  1. Aplicación de la evaluación formativa y por competencias en una práctica específica de laboratorio

    Revista Infancia, Educación y Aprendizaje, Vol. 3, Núm. 2, pp. 169-173