Publicacions (34) Publicacions de SARA GIGANTO FERNÁNDEZ

2024

  1. Additive Manufacturing of Ceramic Reference Spheres by Stereolithography (SLA)

    Applied Sciences (Switzerland), Vol. 14, Núm. 17

  2. Influence of point cloud filtering on optical inspection of additive manufactured metal parts

    Precision Engineering, Vol. 90, pp. 12-20

  3. Laser Triangulation Sensors Performance in Scanning Different Materials and Finishes

    Sensors, Vol. 24, Núm. 8

2023

  1. Comparison between the Effects of Normal Rain and Acid Rain on Calcareous Stones under Laboratory Simulation

    Hydrology, Vol. 10, Núm. 4

  2. Creación e implementación de Entornos Virtuales para mejorar los procesos enseñanza-aprendizaje en las Prácticas de Laboratorio

    Modelling in Science Education and Learning, Vol. 16, Núm. 1, pp. 43-54

  3. Inspección de productos de fabricación aditiva: medición e instrumentos

    Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 423-453

  4. Machinability of Selective Laser Melted 17-4 PH Stainless Steel in Turning Process

    Key Engineering Materials, Vol. 956, pp. 127-133

  5. Optimization of Sandblasting to Improve the Surface Finish of 17-4PH Parts Manufactured by SLM Using Different Laser Scanning Strategies

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 97-103

  6. Performance Study of Graphene Oxide as an Antierosion Coating for Ornamental and Heritage Dolostone

    Advanced Materials Technologies, Vol. 8, Núm. 18

  7. Procesos de fabricación aditiva de piezas cerámicas

    Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 301-329

2022

  1. Comparison of Chemical and Mechanical Surface Treatments on Metallic Precision Spheres for Using as Optical Reference Artifacts

    Materials, Vol. 15, Núm. 11

  2. Impact of the laser scanning strategy on the quality of 17-4PH stainless steel parts manufactured by selective laser melting

    Journal of Materials Research and Technology, Vol. 20, pp. 2734-2747

  3. Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts

    Journal of Materials Research and Technology, Vol. 16, pp. 1647-1658

  4. Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact

    Sensors, Vol. 22, Núm. 22

  5. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

    Rapid Prototyping Journal, Vol. 28, Núm. 6, pp. 1129-1143

2021

  1. Correlación entre la porosidad y la estrategia de escaneo láser en piezas metálicas fabricadas mediante Fusión Selectiva por Láser

    VII Jornadas de investigadoras de Castilla y León [Recurso electrónico]: la aventura de la ciencia y la tecnología (Fundación 3CIN), pp. 63

  2. Evaluation of the Influence of Post-Processing on the Optical Inspection Accuracy of Additively Manufactured Parts

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  3. Evaluation of the influence of post-processing on the optical inspection accuracy of additively manufactured parts

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012062

  4. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012041

  5. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25