Publicacions en què col·labora amb JOAQUÍN BARREIRO GARCÍA (35)

2023

  1. Automatic classification of pores in aluminum castings using machine learning

    XLIV Jornadas de Automática: libro de actas: Universidad de Zaragoza, Escuela de Ingeniería y Arquitectura, 6, 7 y 8 de septiembre de 2023, Zaragoza

  2. Influence of Post-Processing on the Properties of Multi-Material Parts Obtained by Material Projection AM

    Polymers, Vol. 15, Núm. 9

2021

  1. Comparative study on microstructure and corrosion resistance of al-si alloy cast from sand mold and binder jetting mold

    Metals, Vol. 11, Núm. 9

  2. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  3. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012041

2020

  1. Application of vacuum techniques in shell moulds produced by additive manufacturing

    Metals, Vol. 10, Núm. 8, pp. 1-20

  2. Feasibility of calcium sulfate moulds made by inkjet 3D printing for rapid casting of aluminium alloys

    Metals, Vol. 10, Núm. 6, pp. 1-17

  3. Heat treatments for improved quality binder jetted molds for casting aluminum alloys

    Additive Manufacturing, Vol. 36

  4. Towards functional parts by binder jetting calcium-sulphate with thermal treatment post-processing

    Materials, Vol. 13, Núm. 17

2019

  1. Analysis of microstructure and defects in 17-4 PH stainless steel sample manufactured by Selective Laser Melting

    Procedia Manufacturing

  2. Comparative study of aluminum alloy casting obtained by sand casting method and additive manufacturing technology

    Procedia Manufacturing

2018

  1. Characterization of materials used in 3D-printing technology with different analysis techniques

    Annals of DAAAM and Proceedings of the International DAAAM Symposium

  2. Knowledge base model for automatic probe orientation and configuration planning with CMMs

    Robotics and Computer-Integrated Manufacturing, Vol. 49, pp. 285-300

  3. Modelo de evaluación y seguimiento de los trabajos fin de grado (TFG) y trabajos fin de máster (TFM) tutorizados en el área de Ingeniería de los Procesos de Fabricación

    XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

2017

  1. Behaviour of infiltrating materials on Calcium Sulphate hemihydrate parts made by 3D printing

    Procedia Manufacturing, Vol. 13, pp. 848-855

  2. Motivación e implicación de los estudiantes en el proceso de evaluación formativa realizando trabajo en grupo en el aula

    Revista Infancia, Educación y Aprendizaje, Vol. 3, Núm. 2, pp. 180-184

  3. Nozzle design for combined use of MQL and cryogenic gas in machining

    International Journal of Precision Engineering and Manufacturing - Green Technology, Vol. 4, Núm. 1, pp. 87-95

  4. TCM system in contour milling of very thick-very large steel plates based on vibration and AE signals

    Journal of Materials Processing Technology, Vol. 246, pp. 144-157

2016

  1. A cryo lubri-coolant approach for finish milling of aeronautical hard-to-cut materials

    International Journal of Mechatronics and Manufacturing Systems, Vol. 9, Núm. 4, pp. 370-384

  2. Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304

    Journal of Cleaner Production, Vol. 139, pp. 440-449