Publicaciones en las que colabora con JOAQUÍN BARREIRO GARCÍA (17)

2024

  1. Influence of point cloud filtering on optical inspection of additive manufactured metal parts

    Precision Engineering, Vol. 90, pp. 12-20

2023

  1. Optimization of Sandblasting to Improve the Surface Finish of 17-4PH Parts Manufactured by SLM Using Different Laser Scanning Strategies

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 97-103

  2. Procesos de fabricación aditiva de piezas cerámicas

    Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 301-329

2022

  1. Impact of the laser scanning strategy on the quality of 17-4PH stainless steel parts manufactured by selective laser melting

    Journal of Materials Research and Technology, Vol. 20, pp. 2734-2747

  2. Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts

    Journal of Materials Research and Technology, Vol. 16, pp. 1647-1658

  3. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

    Rapid Prototyping Journal, Vol. 28, Núm. 6, pp. 1129-1143

2021

  1. Evaluation of the Influence of Post-Processing on the Optical Inspection Accuracy of Additively Manufactured Parts

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  2. Evaluation of the influence of post-processing on the optical inspection accuracy of additively manufactured parts

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012062

  3. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012041

  4. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  5. Laser defocusing effect on the microstructure and defects of 17-4ph parts additively manufactured by slm at a low energy input

    Metals, Vol. 11, Núm. 4

  6. Laser line scanner aptitude for the measurement of Selective Laser Melting parts

    Optics and Lasers in Engineering, Vol. 138

2020

  1. /Optimización del proceso de fabricación aditiva de piezas metálicas mediante Fusión Selectiva por Láser y su posterior inspección óptica avanzada

    VI Jornadas de Investigadoras de Castilla y León: la aventura de la ciencia y la tecnología (Fundación 3CIN), pp. 44

  2. Analysis of modern optical inspection systems for parts manufactured by selective laser melting

    Sensors (Switzerland), Vol. 20, Núm. 11

  3. Characterisation of 17-4PH metallic powder recycling to optimise the performance of the selective laser melting process

    Journal of Materials Research and Technology, Vol. 9, Núm. 2, pp. 1273-1285

2019

  1. Improvement Surface Quality of SLM Parts by means of the Combination of Different Scanning Strategies

    Lecture Notes in Engineering and Computer Science

2018

  1. New procedure for qualification of structured light 3D scanners using an optical feature-based gauge

    Optics and Lasers in Engineering, Vol. 110, pp. 193-206