Publicacións (117) Publicacións de JOAQUÍN BARREIRO GARCÍA

2024

  1. Analysis of gaseous emission and particle number size distributions in metal casting processes with binder jetting moulds

    Building and Environment, Vol. 252, pp. 111297

  2. Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts

    Materials Letters, Vol. 355

  3. Influence of point cloud filtering on optical inspection of additive manufactured metal parts

    Precision Engineering, Vol. 90, pp. 12-20

2023

  1. Automatic classification of pores in aluminum castings using machine learning

    XLIV Jornadas de Automática: libro de actas: Universidad de Zaragoza, Escuela de Ingeniería y Arquitectura, 6, 7 y 8 de septiembre de 2023, Zaragoza

  2. Design of Supports to Avoid Deformations in the Process of Alumina Printing by Stereolithography

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 67-75

  3. Influence of Post-Processing on the Properties of Multi-Material Parts Obtained by Material Projection AM

    Polymers, Vol. 15, Núm. 9

  4. Optimization of Sandblasting to Improve the Surface Finish of 17-4PH Parts Manufactured by SLM Using Different Laser Scanning Strategies

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 97-103

2022

  1. Impact of the laser scanning strategy on the quality of 17-4PH stainless steel parts manufactured by selective laser melting

    Journal of Materials Research and Technology, Vol. 20, pp. 2734-2747

  2. Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts

    Journal of Materials Research and Technology, Vol. 16, pp. 1647-1658

  3. Novel post-processing procedure to enhance casting molds manufactured by binder jetting AM

    Additive Manufacturing, Vol. 59

  4. Precipitation hardening stainless steel samples processed by additive manufacturing: Process parameters and thermo mechanical treatments effects on microstructure and corrosion resistance

    Optics and Laser Technology, Vol. 156

  5. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

    Rapid Prototyping Journal, Vol. 28, Núm. 6, pp. 1129-1143

2021

  1. Comparative study on microstructure and corrosion resistance of al-si alloy cast from sand mold and binder jetting mold

    Metals, Vol. 11, Núm. 9

  2. Evaluation of Mechanical Properties of FDM Components Reinforced with Fibre

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  3. Evaluation of mechanical properties of FDM components reinforced with fibre

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012069

  4. Evaluation of the Influence of Post-Processing on the Optical Inspection Accuracy of Additively Manufactured Parts

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  5. Evaluation of the influence of post-processing on the optical inspection accuracy of additively manufactured parts

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012062

  6. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    IOP Conference Series: Materials Science and Engineering, Vol. 1193, Núm. 1, pp. 012041

  7. Influence of printing conditions in Binder Jetting on the resin infiltration post-processing

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

  8. Laser defocusing effect on the microstructure and defects of 17-4ph parts additively manufactured by slm at a low energy input

    Metals, Vol. 11, Núm. 4